• FC-4G to SATA-II RAID subsystem
• Eight (8) FC-4G host ports w/ onboard bypass
• Redundant, active-active RAID controllers
• Hardware RAID6 XOR by dedicated ASIC400 chipsets
• Intelligent load-balancing; internally & between host links by the EonPath™ multi-path software
• Proactive parity and media error manual and scheduled scan/repair
• High-availability, modular enclosure design
• Adaptive writer policy
• Up to 2GB cache per controller
  
  
  

Specifications

RAID Controller

• Hardware RAID parity computing
• Supports RAID 0, 1 (0+1), 3, 5, 6, 10, 30, 50, 60, and NRAID
• RAID Migration
• Configurable stripe size and write policy per array
• Multiple Global, Dedicated, & Enclosure-specific hot-spares
• Intelligent Drive Handling:
  • In degraded mode: skips irreparable blocks to continue rebuild
  • In normal operation: data-block verification and repair

Host Interface

• Eight (8) FC-4G host port w/HUB functions
• Concurrent I/O commands
• Tagged command queuing up to 256
• Adaptive cache write policies

Drive Interface

• Sixteen (16) 3.0Gbps SATA-II, hot-swappable drive trays
• Accommodates 1-inch pitch, 3.5-inch SATA-II disk drives
• S.M.A.R.T. and NCQ support· Automatic bad-sector reassignment
• Dedicated bandwidth to each connected drive

System Components

• Heavy duty 3U enclosure
• Dual-redundant RAID controller modules
• One (1) 512MB DDR RAM DIMM module (default, supports up to 2GB in size) on each controller
• Two (2), hot-swappable, redundant, 530W power supply units
• Two (2), redundant, dual-speed cooling modules
• Sixteen (16), hot-swappable drive trays
• Two (2) forearm handles
• LCD keypad panel
• Li-Ion, life expectancy & charge level aware battery backup unit (BBU)

Management

• COM1 serial port for local access to firmware-embedded utility
• COM2 for UPS connection
• GUI, Telnet, and SSH system monitoring via Ethernet
• Browser-based or Java-based RAIDWatch manager software
• Firmware-embedded manager via RS-232C (audio jack) that is platform independent
• Widest range of event notification methods including email, LAN broadcast, fax, SNMP traps, SMS, and MSN
• LCD keypad panel to all configuration options
• Variable logical drive options per DIMM size
• Module status LED indicators:

• Two (2) per drive tray
• Seven (7) per controller module
• One (1) per power supply unit
• One (1) per BBU module
• Two (2) per cooling module

• Module failure alert through I 2 C bus

Interfaces

• One (1) Fast Ethernet management port
• Two (2) serial COM port (38400, n, 8, 1)

Power Supply Module Two (2) redundant hot-swappable power supplies with PFC

Input	100~240VAC with 530W PFC (auto-switching)
	47 to 63Hz
Output	(Maximum output: 530 Watts)
	+12.0V	30A max.
	+ 5.0V	32A max.
	+ 3.3V	32A max.

Cooling Module

Two (2) redundant dual-fan cooling modules

Maximum air flow:	High speed: 90 CFM Low speed: 70 CFM

Environmental Specifications

Operating temperature:	0º to 40ºC (35ºC w/ battery)
Non-operating temperature:	- 40º to 60ºC
Relative humidity:	5 to 95%, non-condensing
Altitude:	Operating: sea level to 12,000 ft Non-operating: sea level to 40,000 ft

Dimensions:

• Chassis without handles: 445(W) x 130(H) x 488.2(D) mm (17.5 x 5.1 x 19.2 inches)
• Chassis with handles: 482.6(W) x 131(H) x 504.3(D) mm (19 x 5.2 x 19.9 inches)
• Package: 423(H) x 567(W) x 772(D) mm (16.7 x 22.3 x 30.4 inches)

System weight:

• Net weight: 28kg
• Gross weight: 31kg (without drives)