• Dual-active controller
• 4G FC to SAS or SATA-II disk drives
• Eight (8 - R1430) 4G FC host ports
• Hardware RAID5 and RAID6 engine by dedicated ASIC400 chipsets
• EonPath™ multipathing sotware

Specifications

RAID Controller

• Hardware RAID parity computing
• Hardware RAID5 & RAID6 parity computation
• Supports RAID 0, 1 (0+1) , 3, 5, 6, 10, 30, 50, 60, and NRAID
• RAID Migration
• Configurable stripe size and write policy per array
• Multiple Global, Dedicated, & Enclosure-specific hot-spares
• Intelligent Drive Handling:
  • In degraded mode: skips irreparable blocks to continue rebuild
  • In normal operation: data-block verification and repair

Host Interface

• Eight (8) 4G FC
• 4Gb/s via short-/long-wavelength LC-type SFP
• Concurrent I/O commands
• Tagged command queuing up to 1024 Max
• command queue up to 1024
• Fault-tolerant host links via onboard bypass

Drive Interface

• Sixteen (16) 3.0Gbps SAS, hot-swappable drive trays
• Accommodates 1-inch pitch, 3.5-inch SAS or SATA-II disk drives
• S.M.A.R.T. and NCQ support
• Automatic bad-sector reassignment
• Dedicated bandwidth to each connected drive

System Components

• Heavy duty 3U enclosure
• Dual- (R1430) RAID and I/O management controller module
• Fault-tolerant modules interfaced through a common backplane
• High availability SAS domains to hard drives via expanders and port selectors
• One (1) 512MB DDR DIMM module (default, supports up to 2GB in size)
• Redundant, hot-swappable 530W power supply units
• Redundant, dual-speed cooling modules
• Sixteen (16), hot-swappable drive trays
• Two (2) forearm handles
• Li-Ion, life expectancy-aware battery backup unit (BBU)

Management

• COM1 serial port for local access to firmware-embedded utility
• COM2 for UPS connection

• GUI, Telnet, and SSH system monitoring via Ethernet
• Browser-based or Java-based RAIDWatch manager software
• Firmware-embedded manager via RS-232C (audio jack) that is platform independent
• Widest range of event notification methods including email, LAN broadcast, fax, SNMP traps, SMS, and MSN
• LCD keypad panel to all configuration options
• Event log in reserved space; Administrator's activity log
• Variable logical drive options per DIMM size
• Module status LED indicators:

• Two (2) per drive tray
• Seven (7) per controller module
• One (1) per power supply unit
• One (1) per BBU module
• Two (2) per cooling module

• Presence detect & thermal sensors via I 2 C bus

Physical/Electrical

Interfaces

• Four (4) SFP host ports for 4Gb/s DAS or SAN connections
• One (1) Fast Ethernet management port
• Two (2) serial COM port (38400, n, 8, 1)

Power Supply Module

Redundant hot-swappable power supplies with PFC

Input	100VAC at 9A, 240VAC at 4.5A with PFC (auto-switching)
	47 to 63Hz
Output	(Maximum output: 530 Watts)
	+12.0V	32A max.
	+ 5.0V	32A max.
	+ 3.3V	30A max

Cooling Module

Redundant dual-thermal-fan cooling modules

Maximum air flow	High speed: 90CFM Low speed: 70CFM

Environmental Specifications

Operating temperature:	5° to 40° C (35° C if battery is applied)
Non-operating temperature:	- 40° to 60° C
Relative humidity:	5 to 95%, non-condensing
Operating altitude:	Operating: 0 to 10,000 ft

Dimensions

• Without protrusions: 131H x 446.2W x 500D mm
• With protrusions: 131H x 485W x 532D mm
• Package dimensions: 476H x 592W x 695D mm

System weight

• Net weight: 34kg
• Gross weight: 32kg (without drives)